ZSPM4521
Evaluation Kit Manual
Kit Description
February 12, 2013
© 2013 Zentrum Mikroelektronik Dresden AG
— Rev. 1.00
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the
prior written consent of the copyright owner. The information furnished in this publication is
subject to changes without notice.
11 of 18
9.1.
Status Section
Click on
the “Read Status” button to read the current values of monitor registers of the ZSPM4521 on the EVB.
Enabling t
he “Auto Poll” feature will automatically read the status bits at the time interval specified in the adjacent
field.
Figure 9.2 Reading Status Registers
Note: If any of the Status register bits shows a fault condition, the adjacent indicator is displayed as red as shown
in the figure below.
Figure 9.3 Fault Indication for Status Register Bits
Click “Read Status” button
to update status register
readings from ZSPM4521.
Check “Auto Poll” box to
continuously, automatically
update the status register
readings at the interval set
in the adjacent field.
