STEP 10: SLIDE THE DISHWASHER PARTIALLY INTO THE CABINET
Caution:
Do not push against the front panel with your knees. Damage
will occur.
1. Position the dishwasher in front of the opening, then slide the dishwasher into the
opening a few inches at a time.
2. Pull the drain hose through the opening under the sink as you proceed. Stop
when the dishwasher is a few inches in front of the adjacent cabinetry.
3. Make sure that the drain hose is not kinked under the dishwasher and that there
is no interference with the water line, wiring, or any other component.
STEP 11: POSITION THE DISHWASHER UNDER THE COUNTERTOP
1. Make sure that the wires are secure under the dishwasher and not pinched or in
contact with door springs or other dishwasher components.
2. Push the dishwasher into the cabinet. The front corners of the dishwasher door
should be flush with the cabinet doors. Be careful not to dent the front panel with
your knees or damage the countertop or cabinets with dishwasher parts.
Tip:
Check tub insulation blanket, if equipped. It should be positioned
so it is not bunched up or interfering with door springs.
Check by opening and closing the door.
Note:
You will not have access to the back leveling legs once the
dishwasher is put in place.
INSTALLATION
25
Dishwash
er P
osition
