16
15
Connecting th
e W
ater Line
CONNECTING THE WATER LINE
Water line installation kits are available at a local hardware store.
1. Attach new stainless steel braided line to the main water valve, making sure that
the water is turned off.
2. Connect the other end of the braided line to the 1/4 to 1/4 brass compression
connection that is in the water line kit. Take off the other end by unscrewing the
brass connector.
3. Slide the female screw connection piece that was taken off of the brass
connector and with the brass ring around the base of the plastic water line. That
attaches to the refrigerator.
4. Then, take the plastic line and with the female connection piece and securely
tighten it to the brass connector piece.
5. Finally, turn on water and slowly making sure there are not water leaks.
INSTALLATION
Refrigerating chamber
Freezing chamber
The low temperature freezing chamber may keep food fresh for a long time and it is mainly used to
store frozen foods and making ice.
The freezing chamber is suitable for storage of meat, fish, rice balls and other foods not to be
consumed in short term.
Chunks of meat are preferably to be divided into small pieces for quick freezing and easy access.
Please be noted food shall be consumed within the shelf time.
The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables, beverages and
other food consumed in the short term.
Cooking foods shall not be put in the refrigerating chamber until cooled to room temperature.
Foods are recommended to be sealed up before putting into the refrigerator.
The glass shelves can be adjusted up or down for a reasonable amount of storage space and easy use.
The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor
Flex Drawer
The flex drawer temperature can be adjusted in -1 °C/30 °F, 1 °C /34 °F, 3 °C /37 °F and 5 °C /4 °F,
and the appropriate temperature can be selected according to the needs of different foods.
When flex drawer temperature is set at - 1 °C /30 °F, it is suitable to store meat.
When flex drawer temperature is set at 1 °C /34 °F, it is suitable to store drinks.
When flex drawer temperature is set at 3 °C / 37 °F, it is suitable to store cooked food.
When flex drainer temperature is set at 5 °C / 41 °F, it is suitable to storered wine.
15
Fle x Draw e r
Lowe r freeze r d raw e r
Upp e r freeze r d raw e r
Dispa y sc ree n
Pr
oduct F
eatur
es
OPERATION
3 Structure and functions
3.1 Key components
The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor
Re frige rat ing c ha m b e r
14
Ic e m a ke r
Doo r tra y
Two v e g etab le ca se
Doo r tra y
Flex Drawer
Freeze r Drawe r
Doo r tra y
She lf
She lf
LED lig hting
Turnove r bo x
Filter
She lf
LED lighting
Filter
Door tray
Shelf
Shelf
Shelf
Display screen
Flex drawer
Ice maker
Door tray
Ice dispenser chute
Vegetable case
Flex drawer
Freezer drawer
Door tray
Upper freezer drawer
Lower freezer drawer
