USBCANFD-100U-mini
USBCANFD Series CANFD Interface Card User Manual
©2021 Guangzhou ZLG Electronics Technology Corp.,Ltd.
8
User Manual
3. Driver Installation
This document uses a PC running Windows 7 as an example to describe how to install the
USBCANFD-100U-mini driver.
3.1 Installing the Driver Under Windows
Connect the USBCANFD-100U-mini interface card to the computer with a USB cable to ensure that the
device is powered properly.
Right-click [Computer] and choose [Properties] (as shown in Figure 3.1) to open the Device Manager. Before
the driver is installed, the device manager is displayed, as shown in Figure 3.2. At this time, if the device manager
does not display the message, check whether the USB cable is connected correctly, whether the USB port of the
computer is disabled, and whether the device indicator SYS is on (red indicator at this time).
Figure 3 Starting the computer device manager
Figure 3.2 Starting the computer device manager
