28
©2017 Guangzhou ZHIYUAN Electronics
Date: 2017/05/22
User Manual
V1.00
Guangzhou ZHIYUAN Electronics Co., Ltd.
CAN-bus recording analyzer
CANREC User Manual
Figure 5- 27: “Search” dialog box
2) Users can select proper search condition for different demand, and also can click
the “Set…” key to do more detailed setting for more accurate message searching.
3) Click the “Next” or “Previous” key to do the search.
5.7.6
Waveform
Each message corresponds to a waveform diagram. Users can click a message to
display its corresponding waveform, and view the detailed waveform information in
the waveform view window. The steps are as follows:
1) Click the “View” key on the menu tab, and then click the “Waveform”. The
waveform view window shown in Figure 5- 28 appears.
Figure 5- 28: Waveform view area
2) Switch to a different message, and the corresponding waveform diagram is
displayed in real time.
3) Move the cursor onto the waveform and scroll the mouse to zoom in and out the
waveform.
4
）
Place the cursor onto the waveform to view the time interval between two
waveforms and the voltage at the current time point, as shown in Figure 5- 29.
