21
©2017 Guangzhou ZHIYUAN Electronics
Date: 2017/05/22
User Manual
V1.00
Guangzhou ZHIYUAN Electronics Co., Ltd.
CAN-bus recording analyzer
CANREC User Manual
Figure 5- 13: Range setting view
The range setting should be performed for the CAN-H and CAN-L of a channel
respectively, including range, offset and coupling.
Range.
Voltage amplitude in the vertical direction. The optional voltage amplitudes
include 1V, 4V, 8V, 20V and 50V.
Offset.
Offset voltage of the waveform, i.e., the voltage deviation of the horizontal
starting line of the waveform from the center of the screen. The offset range is [-10V,
+10V].
Notes:
The range can only be set for CH1, CH2, CH3 and CH4.
5.6.3
System Configuration
1. Project Management
The CAN message and waveform data are saved based on a project. A new project is
created every time the device runs. All project lists from the current device can be
observed in the project management interface shown in Figure 5- 14.
Figure 5- 14: Project list view
