16
©2017 Guangzhou ZHIYUAN Electronics
Date: 2017/05/22
User Manual
V1.00
Guangzhou ZHIYUAN Electronics Co., Ltd.
CAN-bus recording analyzer
CANREC User Manual
5.5.2
System software Overview
Figure 5- 5 shows the main software interface. It is composed of three areas:
1. Main display area: it is the main display area of system. The display is dependent
on the current function selected by the system.
2. System status bar: it display the status of each system function, including device
ON status, sharing setting, battery capacity, hard disk capacity, IP address and
other system information.
3. Menu bar: it corresponds to the key function of physical menu. Click the menu to
access its sub-menu or perform the corresponding menu function.
Figure 5- 5: Main software interface
5.6 Device Panel Software Function Introduction
5.6.1
Statistics Overview View
This is the view after system is started, as shown in Figure 5- 6. The configuration
information, statistic information and Enable status of all device channels are
provided in this view. Users can intuitively learn the current device operating status.
