ZLG CANDTU-200UWGR Page 54 User Manual Download

Page: 54 / 61

CANDTU-200UWGR

CAN Bus Message Recording and Wireless Data Transmission Equipment User Manual

User Manual

6. Quick Instructions

This chapter introduces the basic usage of the device. You will quickly learn about

how to use the device and have an intuitive understanding of the device. Before using the

device, understand some default parameters and make simple preparations.

6.1 Operational Guidelines

6.1.1 Configuration

1) Connect the USB. This product uses the CANDTU configuration software to configure

the device through the USB interface. Therefore, the USB connection is only required

to configure the device. Whether the USB cable is connected at other times has no

effect on the product functions.

2) Install driver. Use the driver in the driver directory of the CANDTU configuration

software directory.

3) Perform download. Click the download configuration button in the CANDTU

configuration software. After the download is complete, the device directly enters the

recording state.

Note: When you use the device for the first time, synchronize the device clock once by using the

CANDTU configuration software.

6.1.2 Records

1) Enter the record. If no fault occurs during power-on, downloading configuration,

inserting SD card, clearing data and resuming recording, the device will enter the

recording state, and the buzzer beeps 200 ms for two consecutive times.

2) Start recording. When a CAN bus message is received, an error occurs on the bus, or

a marked message is generated by pressing the button, the device will record the

data and store the message directly to the SD card.

6.1.3 Upgrade

1. SD card upgrade

1) Save the firmware file to the SD card. The firmware file name must be:

candtu_app.bin. The storage path must be in the root directory of the SD card, as

shown in Figure 6.1.

Summary of Contents for CANDTU-200UWGR






























































Search results

Summary of Contents for CANDTU-200UWGR

Reviews:

Related manuals for CANDTU-200UWGR

Brands by name

Popular brands

ZLG CANDTU-200UWGR, User Manual

Search results

Summary of Contents for CANDTU-200UWGR

Reviews:

Related manuals for CANDTU-200UWGR

Brands by name

Popular brands