ZK-D3180
User Manual
Copyright©2021 ZKTECO CO., LTD. All rights reserved
.
P a g e
|
9
3
Installation Setup
3.1
Safety Precautions
Install the detector in a stable and smooth area. Make sure that the detector is installed
firmly in the selected area.
It can be used for both indoor and outdoor purposes. If used outdoor, cover it with a
canopy to protect against rain.
Before installation, make sure the left and right door panels are placed at the
corresponding location. Avoid high temperatures and wet environments.
Wait for 1 minute for the self-diagnosis of the detector when it starts. Do not touch the
detector during a security check to avoid false alarm.
Install the detector away from radio-frequency devices to avoid interference. Make sure
that there is no large metal object or strong magnetic field around the detector for at
least 2 meters.
Do not hit the detector hardly, as it may cause false alarms.
Do not disassemble the unit without the guidance of a professional technician.
Each device has a warranty card, with which users can have their devices maintained or
repaired free of charge within the warranty period.
3.2
Instructions to Pedestrians
A line must be drawn at 50cm away from the detector. The pedestrians must pass
through the detector one-by-one.
Pedestrians should line up one-by-one to ensure the smooth operation of the detector.
Pedestrians should walk at a normal speed. They must not intentionally form a crowd,
rush, walk slowly, or crush the door panel.
Before passing through the metal detector, the pedestrians must remove all the carried
metal objects (such as keys, mobile phone, watch, coins, etc.), and place it on the
security chute or a table, and pick it up after the security check.
If the detector alarms when someone passes through, that means there is/are some
metal object(s) hidden in the body. The security guard can use a hand-held metal
detector to accurately detect the hidden position according to the alarm zones.
