ZKTeco VT07-B22L, User Manual

Page: 31 / 33

Troubleshooting
The indoor monitor cannot start up or power off automatically.
Check whether it has power-failure, and power it on again.
The indoor monitor display screen is too dim.
Check whether the brightness and contrast settings of screen are
correct.
No sound during the communication.
Check whether the indoor monitor is set as mute mode, or the volume is
adjusted at the minium.
The indoor monitor cannot monitor the outdoor panel
.
Other user is using the system, so you can use it once he/she
finished the operation.
Multimedia files cannot be played normally.
Check whether the system supports the file format. Please refer to
multimedia setting for details.
No response when clicking indoor monitor display screen.
Press “Unlock” button for 5s, or slowly slide horizontally or vertically on
the LCD to make touchscreen calibnation. It needs to be calibrated twice.
Touchscreen responses slowly or cannot make calibnation.
Take down any protective paster, since it may affect identification
and input for device;
Ensure the finger is dry and clean when clicking touchscreen;
Restart the device to clear any temporary software error.
The temperature of device is too high.
Long- term use leads to high t emperature. It’s normal a nd will not
affect the device’s use life and performance.