2 TS5000A Quick Start Guide
Chapter 3 Terminal of Control Panel
3.1 Descriptions
1.
System power input:
24V power input, supply power to the master panel.
2.
Buzzer:
12V power output, buzzer power supply.
3.
Indicator light:
Power output related to the indicators.
4.
RS232 communication:
Connect to the button board.
5.
L-O GND R-O:
Turnstile open gates signal input.
6.
Motor port:
Connect to the motor to provide power for the motor.
7.
Electromagnetic brake:
Connect the electromagnet inside the machine core, play the role of anti-collision,
brake.
8.
Drop arm solenoid:
Drop the turnstile automatically in case of emergency such as a blackout.
3.2 DIP switch configuration
1.
Using the DIP switch to set the working mode of the device.
2.
If DIPs “1”, “2”, “3”, “4” are all “OFF”, you may set the default position of the arm. If the arms are already in the
desired position, switch DIP “1” to “ON”. The open mode of the device can be set with the button board.
①
②
③
④
⑤
⑥
⑦
⑧
