TS2000 Pro Series Tripod Turnstile
User Manual
P a g e
| 14
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
In case of emergencies
This equipment is designed to drop down arms automatically if there is power failure thus make the
passage being open to the public. And there is interface in the turnstile control board to connect an
emergency switch (J6 Drop Arm) which would make the tripod turnstile keep open in case of emergencies.
Note after power restoration, wait for more than 6s and then lift the arms manually.
Maintenance
5.2
Forming maintenance consciousness
The tripod turnstile needs to be maintained regularly and repaired once it is damaged. It is recommended
that warning signs being placed at conspicuous positions for prompting passers-by to pass in a proper
way and in good order. Reasonable maintenance consciousness helps to guarantee long-term usage of
the tripod turnstile.
Regular maintenance
Cleaning and protection liquid dedicated for stainless steel are recommended to wipe the outer shell of
the equipment regularly. The tripod turnstile used outdoors or in an environment with lots of dust must
be maintained once a year at least, for example, clean up the dust and add appropriate lubricating oil to
Disk Wheel. Note regular maintenance should be performed after power off the equipment, as shown in
Figure5-2.
Figure 5-2
Turnstile-opening Solenoid
Lock Rod
Drop-arm
Solenoid
Position Sensor
Disk Wheel
