SBT2000S Swing Barrier Turnstile
User Manual
P a g e
| 8
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Working Principle
1.4
1.
When the power is turned on, SBT2000S performs Power-on Self-Test. If no failure is detected, the
barrier starts to operate normally. If a failure is detected, the system displays related messages and Error
code on the LCD display screen so that the user can have a quick knowledge of the technical issue and
solve the problem.
2.
When the reader detects a valid card, the buzzer will give an audible prompt, indicating that the
card is being read successfully. And then, the reader sends signals to the access controller to request
permission to pass through the passage. If the signal is authorized, the access controller will send the
open signal to the master control panel.
3.
After receiving the signal from the access controller, the control panel sends valid control signals
to the electric motor and opens the barrier.
Technical Specifications
1.5
Dimension(mm)
L=200, W=185, H=1100
Input Voltage
AC100V to120V/200V to 240V,50Hz to 60Hz
Input Control Signal
Switching Signal
Working Temperature
-10°C to 55°C
Infrared Sensor
1
Operational Voltage
DC 24V
Working Humidity
20% to 93%
Throughput rate
Maximum: 10 person/minute
Working Environment
Indoor/Outdoor (with shelter)
