RevFace15
User Manual
P a g e
| 56
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Security settings
8.6
Tap
Security Settings
on the
System
interface to go to the Security settings.
Function Description
Function Name
Description
Security Mode
Select whether to enable the security mode to protect the device
and the user's personal information. You can set the device to work
offline and hide the user's personal information to prevent leakage
during user verification.
Standalone Communication
To avoid being unable to use when the device is offline, you can
download the C/S software (such as ZKAccess 3.5) on your computer
in advance for offline use.
SSH
SSH is used to enter the background of the device for maintenance.
User ID Masking
When enabled, and then the user is successfully compared and
verified, the User ID in the displayed verification result will be
replaced with an * to achieve secure protection of sensitive private
data.
Display Verification Name
Set whether to display the username in the verification result
interface.
Display Verification Mode
Set whether to display the verification mode in the verification result
interface.
Factory Reset
8.7
The Factory Reset function restores the device settings such as communication settings and system
settings, to the default factory settings (this function does not clear registered user data).
Tap
Reset
on the
System
interface and then tap
OK
to restore the default factory settings.
