PA22
User Manual
P a g e
| 23
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Function Description:
Function
Descriptions
Comm Key
The default password is 0, which can be changed later. The Comm Key may contain
1 to 6 digits.
Device ID
It is the identification number of the device, which ranges between 1 to 254. If the
communication method is RS232/RS485, then you need to input this device ID in
the software communication interface.
5.4.
Wireless Network
The device provides a Wi-Fi module, which can be built in within the device module or can be externally
connected.
The Wi-Fi module enables data transmission via Wi-Fi (Wireless Fidelity) and establishes a wireless network
environment. Wi-Fi is enabled by default in the device. If you don't want to use the Wi-Fi network, you can
toggle the Wi-Fi to disable the button.
Select
Wireless Network
on the
Comm.
settings interface to configure the Wi-Fi settings.
Search the Wi-Fi Network:
1.
Wi-Fi is enabled in the device by default. Toggle the
button to enable or disable Wi-Fi.
2.
Once the Wi-Fi is turned on, the device searches for the available Wi-Fi within the network range.
3.
Choose the required Wi-Fi name from the available list and enter the correct password in the password
interface, and then select
Connect to Wi-Fi(OK)
and press
[M/OK]
to confirm.
Wi-Fi Enabled
: Choose the required network from the searched network list.
Click the password field to enter the password, and then select
Connect to Wi-Fi (OK)
and press
