PA22
User Manual
P a g e
| 21
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
5.
Communication Settings
Select
COMM.
on the main menu to get into communication settings and set parameters of the network,
PC connection, Wi-Fi, cloud server, Wiegand, and network diagnosis.
5.1.
Network Settings
When the device needs to communicate with a PC over the Ethernet, you need to configure network
settings and ensure that the device and the PC are connecting to the same network segment.
Select
Ethernet
on the
Comm.
Settings interface.
Function Description:
Function
Descriptions
IP Address
The factory default value is 192.168.1.201. Please set them according to the
actual network situation.
Subnet Mask
The factory default value is 255.255.255.0. Please set them according to the
actual network situation.
DNS
The factory default address is 0.0.0.0. Please set them according to the actual
network situation.
TCP COMM. Port
The factory default value is 4370. Please set them according to the actual
network situation.
DHCP
Dynamic Host Configuration Protocol helps in dynamically allocating IP
addresses for clients via server.
Display in Status Bar
To set whether to display the network icon on the status bar.
