MA300
User Manual
P a g e
| 16
Copyright©2023 ZKTECO CO., LTD. All rights reserved
3
Device Operations
Management Card
3.1
3.1.1
Enroll Management Card
To enroll in a management card, proceed as follows:
1.
The device automatically detects whether there exists a management
card.
2.
If the device fails to detect the presence of a management card, it enters
the management card enrollment state. Then proceed with step 3;
otherwise, skip to step 5.
3.
After the system generates the voice prompt “
: Please register the
management card”, you can swipe your card across the sensor area.
Tip:
The device will always be in the management card enrollment state
until your card has been registered successfully.
4.
If enrollment succeeds, the system generates the voice prompt “
:
Registration is successful. The system returns to verification state”.
5.
After returning to the verification state, the system generates the
voice prompt “
: Verify users. Please press your finger or punch your
card”.
