ZKTeco Green Label G4L User Manual Download Page 76

Page: 76 / 91

G4L

User Manual

P a g e

| 75

Function Description

12.3

Download Options

•

On the

USB Manager

interface, tap

Download Options

to set the required download process.

•

Encrypt Attendance Data:

Toggle

Encrypt Attendance Data

to enable or disable the encryption

for Attendance Data

•

Delete ATT Data

: Toggle

Delete ATT Data

to enable or disable the deletion for Attendance data.

Note:

The encrypt attendance data can only be imported in the software with Access 3.5 version.

Function Name

Description

Screen Saver

Can upload screen saver from the USB drive to the device.
Before uploading, you may select

Upload selected picture

Upload all

pictures

Wallpaper

Can upload wallpaper from the USB drive to the device.
Before uploading, you may select

Upload selected picture

Upload all

pictures

. The images will be displayed on the screen after manual settings.

User Data

Can upload all user information from a USB drive to the device.

User Portrait

Can upload the JPG picture named with a user ID from the USB drive to the
device.
Before uploading, you may select

Upload Current Picture

Upload All

Pictures

Upload work code

Can upload work codes from the USB drive to the device.

Short Message

Can upload a set of public or private short messages, which are read by
specified objects within the specified time after attendance, facilitating
information transmission.

Summary of Contents for Green Label G4L



























































































Search results

Summary of Contents for Green Label G4L

Reviews:

Related manuals for Green Label G4L

Brands by name

Popular brands

ZKTeco Green Label G4L, User Manual

Search results

Summary of Contents for Green Label G4L

Reviews:

Related manuals for Green Label G4L

Brands by name

Popular brands