G4L
User Manual
P a g e
| 66
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Function Name
Description
Normal close time period
Scheduled time period for “Normal Close” mode, so that no one can avail
access during this period.
Normal open time period
Scheduled time period for “Normal Open” mode, so that the door is
always left open during this period.
Verify mode by RS485
The verification mode is used when the device is used either as a host or
slave.
The supported verification mode includes Card/Fingerprint, Fingerprint
only, Card only, Finge Password, Card + Password, Card +
Fingerprint, and Card + Finge Password.
Valid holidays
Configures the Normal Close Period or Normal Open Period settings to
be effective in the set holiday time period.
Toggle to enable or disable the function during holiday.
Speaker Alarm
Transmits a sound alarm or disassembly alarm from the local.
When the door is closed or the verification is successful, the system will
cancel the alarm from the local.
Reset Access Setting
The access control reset parameters include door lock delay, door sensor
delay, door sensor type, normal close time period, normal open time
period, auxiliary input configuration and alarm.
Except for the erased access control data in Data Mgt. is excluded.
11.2
Time Schedule
•
On the
Access Control
interface, tap
Time Schedule
to configure the time settings.
•
The entire system can be defined up to
50
Time Periods.
•
Each Time Period represents
7
Time Zones, i.e.
1
week, and each Time Zone is a standard 24-hour
period per day and the user can only verify within the valid time period.
•
The Time Zone format of each Time Period: HH MM-HH MM, which is accurate to minutes
according to the 24-hour clock.
•
Tap on the grey box to search for the required Time Zone and specify the required Time Zone
number (can specify up to 50 zones).
