G4L
User Manual
P a g e
| 59
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Function Description
Item
Description
Punch State Mode
Off:
Disables the punch state function. Therefore, the punch state key set
under Shortcut Key Mappings menu will not operate.
Manual Mode:
Switches the punch state key manually; the attendance
status will be automatically reset after timeout.
Auto Mode:
The punch state key will automatically switch to a specific
punch status according to the predefined time schedule which can be set
in the Shortcut Key Mappings.
Manual and Auto Mode:
The main interface will display the auto-switch
punch state key. However, the users will still be able to select alternative
that is the manual attendance status. After timeout, the manual switching
punch state key will become auto-switch punch state key.
Manual Fixed Mode:
After the punch state key is set manually to a
particular punch status, the function will remain unchanged until being
manually switched again.
Fixed Mode:
Only the manually fixed punch state key will be shown. Users
cannot change the status by pressing any other keys.
Punch State Timeout (s)
The time duration for the time out, i.e. remaining inactive in the main
menu.
Punch State Required
To set whether the attendance status must be selected during verification.
9.5
Shortcut Key Mappings
Users may define shortcut keys for attendance status and for functional keys which will be defined on the
main interface. So, on the main interface, when the shortcut keys are pressed, the corresponding
attendance status or the function interface will be displayed directly.
•
On the
Personalize
interface, tap
Shortcut Key Mappings
to set the required shortcut keys.
