ZKTeco G4 Pro Series User Manual Download Page 82

Page: 82 / 114

G4 Pro Series

User Manual

P a g e

| 82

10.3.4

Camera Mode

Here, the user can set the procedure of capturing and saving the user photos after verification as per
the requirements.

Tap on the

[Camera mode]

to set the required parameters.

No photo:

User’s photo will not be saved during verification.

Capture photo and save:

User’s photo will be taken and saved during verification.

Save after successful verification:

When the user verification is successful, the photo is taken and

saved.

Save after failed verification:

When the user verification is failed, the photo is captured and saved.

10.3.5

Verification Settings

Here, the user can configure the parameters for user verification.

Summary of Contents for G4 Pro Series


















































































































Search results

Summary of Contents for G4 Pro Series

Reviews:

Related manuals for G4 Pro Series

Brands by name

Popular brands

ZKTeco G4 Pro Series, User Manual

Search results

Summary of Contents for G4 Pro Series

Reviews:

Related manuals for G4 Pro Series

Brands by name

Popular brands