3
Programming the Features through Menu Mode
Touch the keypad to activate the lock.
Press the
0
and
#
keys to access the menu.
Verify the administrator’s identity with his/her card, or by entering the password
then pressing the
#
key to confirm.
Enter the digit corresponding to the function to be performed by following the
audio guide.
Note:
1)
The registered password must be
six digits
.
2)
If you try to register the same password/card again, the lock will prompt "Already
Used!".
3)
The currently logged-in administrator cannot delete his/her admin data.
4)
* Network Setting function is only available for Model DL30Z.
4
1
2
3