BR1200 User Manual
P a g e
|
25
6. Comm. Settings
6.1 Ethernet Settings
When the device is on the initial interface, press
button >
COMM. Settings
>
Ethernet
to
enter the
Ethernet
setting interface.
The parameters below are the default values, please adjust them according to the actual network.
z
IP Address:
The factory default value is192.168.1.201, please adjust them according to the
actual network situation.
z
Subnet Mask:
255.255.255.0
z
Gateway:
0.0.0.0
z
DNS:
0.0.0.0
z
TCP COMM. Port:
4370
z
DHCP:
Dynamic Host Configuration Protocol, which dynamically allocate IP addresses for
clients via the server.
If DHCP is enabled, IP cannot be set manually.
z
Display in Status Bar:
If enabled, it will display the network icon on the status bar.
6.2 Serial Comm. Settings
When the device is on the initial interface, press
button >
COMM. Settings
>
Serial Comm
to enter
Serial Comm
interface.
z
Turning On / OFF RS232/RS485 Function
