BGM1000 Series Barrier Gate (APP Version) User Manual
P a g e
| 30
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
3.
Use in open areas
4.
Replace the remote control to re-match or replace the receiver
Description:
When the boom is closed halfway, it bounces back to the open
state.
Cause:
1.
The barrier boom might not be installed
2.
The spring is too tight, or the length of the barrier boom is changed, and the
spring is not properly adjusted
Solution:
1.
Install the barrier boom
2.
Adjust the spring according to the length of the barrier boom
12
Safety Precautions
It is strictly forbidden to hit the product with hard objects.
When using, please handle with care to avoid strong collision with hard objects.
Do not spill water or corrosive liquids on the surface of the product.
If smoke or a peculiar smell comes from the product, disconnect the power
immediately.
Note:
If the product works abnormally, please contact the dealer in time. Please do not
try to repair it by yourself. If you handle it without authorization, the company is not
responsible for any damage.
13
Transportation and Storage
When loading and unloading the product, handle it with care.
During transportation and storage, place it in a dry and corrosive-free environment.
The product should be protected from moisture, rain, sun, and corrosion.
14
Warranty
This product promises a warranty period of 2 years. Upon normal use of the product,
damages are covered by the warranty. However, damages caused by the following
conditions are not covered by the warranty.
Damages caused by incorrect operation and violation of operating procedures.
Damages caused by repairing the product without authorization.
Abnormalities and damages caused by extremely harsh operating conditions and
operating environment beyond the machine's ability to withstand.
Damages caused by irresistible factors (such as earthquake, tsunami, typhoon).
