INSTALLATION GUIDE
ADAPTOR FOR BTS TO ZIPWAKE AND/OR
HULLS WITH PROTRUDING BOTTOM PLATE
ZIPWAKE IT300-S & IT450-S
NOTE!
Refer to the main Installation Guide when mounting!
NOTE!
Refer to the main Installation Guide for sealing,
cabling and final mounting!
1. Test to see how the adaptor fits on the transom
www.zipwake.com
5. Mount the Interceptors
NOTE! Use the screws
included in the adaptor kit
T30 (PT 6.0x27)
300 S:
x6
450 S:
x10
5 Nm
(3.7 Ib-ft)
Max 2 mm (0.08") between parallel planes.
A
dapt
or
Tr
ansom
Int
er
cept
or
Straight edges
1
Temporarily fit the interceptor back plate onto the adaptor.
Use straight edges to determine the adaptor position and
mark the top on the transom.
2
NOTE!
Protruding hull:
Cut off the lower edge of the adaptor with
a right-angle grinder if necessary!
NOTE!
Remove old sealant/dirt from the
transom ensuring a smooth and clean
surface for adaptor plate to mount to and
to ensure a good seal with o-ring.
NOTE!
Max. 15 mm (0.59")
