background image

YEAR LIMITED

GUARANTEE

W I N D P R O O F   S T O V E

TM

Safety ..................................3
Assembly ............................4
Operation ............................8
Ignition ..............................11
Transport  ..........................12
Maintenance .....................12
Warranty ............................14
Trouble Shooting ..............15
Parts Listing ......................16
Assembly Diagram ...........16

ENGLISH 1-16 / FRANÇAIS 17-31 / ESPAÑOL 32-46

READ AND SAVE THESE INSTRUCTIONS

Use & Care

Manual

Zippo Manufacturing Company  

33 Barbour Street,

Bradford, Pennsylvania 16701 USA

Telephone: 888-368-0826

Customer Care Website: zippo.com

Assembled in USA with domestic 
and foreign components.

843712_rA

ANSI Z21.72-2011
CSA 11.2-2011 
MODEL #: 8202-54Z

ZIPPO MODEL #: 44026

PLEASE RECORD YOUR SERIAL NUMBER, LOCATED INSIDE LID OF  
WINDPROOF STOVE, AND THE DATE OF PURCHASE BELOW.
SERIAL NUMBER ______________________________________________
DATE OF PURCHASE ___________________________________________

THIS INSTRUCTION MANUAL CONTAINS IMPORTANT INFORMATION  
NECESSARY FOR THE PROPER ASSEMBLY AND SAFE USE OF THE  
APPLIANCE. READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS  
BEFORE ASSEMBLING AND USING THE APPLIANCE. FOLLOW ALL  
WARNINGS AND INSTRUCTIONS WHEN USING THE APPLIANCE.

Summary of Contents for 44026

















Reviews: