Zipper Mowers ZI-RBMA1500, User Manual, Page: 33 / 43

CLEANING, MAINTENANCE, STORAGE, DISPOSAL
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at 33
ZI-RBMA1500
16.2.1 Maintenance plan
The type and degree of machine wear depends to a large extent on the operating conditions. The following
intervals apply when the machine is used within the technical limits:
16.2.2 Change gearbox oil
N OTE
Waste oils and fuel are toxic and must not be released into the environment!
Contact your local authorities for information on proper disposal.
• Loosen the four screws (1) and remove the motor
cover (2).
•
Loosen the oil drain plug (3).
•
Drain the old oil into a suitable container.
•
Reinstall the oil drain plug (3).
• Loosen oil filler plug (4).
•
Fill in new gearbox oil (e.g. SAE80W-90, SAE140).
• Reinstall the oil filler plug (4) and remove oil res-
idues with a cloth.
• Fix the motor cover (2) again with the four
screws (1).
16.3 Storage
Store the machine in a dry, frost-proof and lockable place when not in use. Make sure that unauthorised
persons and especially children do not have access to the machine.
N OTE
Improper storage can damage and destroy important components. Only store packed or al-
ready unpacked parts under the intended ambient conditions!
16.4 Disposal
Observe the national waste disposal regulations. Never dispose of the machine, machine com-
ponents or operating equipment in the residual waste. If necessary, contact your local author-
ities for information regarding available disposal options.
If you purchase a new machine or equivalent equipment from your specialist dealer, he is
obliged in certain countries to dispose of your old machine properly.
Intervall Components Action
After usage
•
Machine
•
Clean
Weekly
•
Components that drive the
bending disc
• Clean and lubricate
Monthly
•
Bending tools (bending sleeve,
bending pin, counter pin, stir-
rup head)
•
Check for damages
•
Damaged bending tools must
not be used
•
Gearbox
•
Check for oil leckages
Half-yearly
• Screw connections • Check for firmness
Yearly
•
Gearbox oil
•
Change gearbox oil
•
Sealings, bearings
•
Check
• Change if necessary
•
Machine components
• Replace skewed, cracked,
worn parts