Zipper Mowers ZI-MD500HS, User Manual

Page: 28 / 93

SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  28
ZI-MD500HS
13 SAFETY
13.1 Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
Small loading and transportation tasks in landscaping and agriculture.
Any manipulation of the machine or its parts is a misuse, in this case
ZIPPER-MASCHINEN
and its sales partners cannot be made liable for ANY direct or indirect damage.
Even when the machine is used as prescribed it is still impossible to eliminate certain residual risk
factors.
W A R N I N G

Max. load 500kg

Allowed tilt position in the direction of travel: 30°

Allowed tilt position transverse to direction of travel: 25°

It is forbidden to remove the protection devices and safety devices!

Read also the separately packed operation manual of the engine
manufacturer
HIGHEST RISK OF INJURY!
Prohibited use
 The operation of the machine outside the stated technical limits described in this manual is
forbidden.
 Operation of the machine function without any protection devices is forbidden.
 Any manipulation of the machine and parts is forbidden.
 The machine is not approved for transporting passengers
 The machine is not approved for public traffic!
 The unattended operation on the machine during the working process is forbidden!
 The use of the machine for any purposes other than described in this user-manual is
forbidden.
 It is not allowed to leave the immediate work area during the work is being performed!