CLEANING, MAINTENANCE, STORAGE, DISPOSAL
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
41
ZI-HAEK15000
N OTE
Only a regularly serviced and well maintained machine can be a satisfactory aid. Lack
of maintenance and care can lead to unforeseeable accidents and injuries.
Repairs that require special expertise should only be carried out by authorized ser-
vice centers.
Improper intervention may damage the machine or endanger your safety..
16.3
Maintenance plan
Controls for the maintenance of the machine
Before start-up
Loose or lost screws
Before start-up
Damage to machine parts
Before start-up
Fuel tank for tightness
Before start-up
Damage of knives
Before start-up
Control engine oil-level
After usage
Machine cleaning
Every 20 working hours
Lubricate the bearings (shredder and drive-side)
Every 25 working hours
Cleaing spark plug
Every 20-30 working hours
Cleaning air filter
After 3 month
Check the battery-status and charge battery
Annualy
Engine oil exchange
16.4
Air filter
NOTICE:
Dirty air filters reduce the engine power due to insufficient air flow to the carburettor.
Regular monitoring, especially in dusty atmosphere is therefore essential!
WARNIN G
ATTENTION: Never clean the air filter elements with fuel or flammable solvents:
Warning. Fire or explosion!!
N OTICE
Do not run the motor without an air filter: This dust penetrates through the carburet-
tor and causing premature wear.
16.5
Engine
Information about engine maintenance you can find in operation manual of the engine manu-
facturer!
16.5.1
Engine oil exchange
The engine oil change would be explicitly mentioned here in order to be included in the ma-
chine operating manual. Oil change interval after the first 20h or 1 month after commissioning
and then every 100h or 1x per year.
N OTICE
Engine oils are toxic and must not be released into the environment!
Fol-
low the manufacturer's instructions and contact your local authorities for infor-
mation on proper disposal.
.
1.
Remove the oil drain plug (1) from the engine.
2.
Open the oil tank cap (2). Collect the draining oil in
a collection container and dispose of it properly.
3.
Retighten the oil drain plug after draining.
4.
Fill in fresh oil through the filling opening (3) (see
section Checking the engine oil level).
5.
Use only high quality engine oil, e.g: SAE30, 15W40
or similar!
!
N OTICE
Drain the used oil when the engine is warm.
Warm oil drains quickly and completely.
