OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
21
ZI-BHS605
16.1.2
Starting with a warm Engine
1.
Set the O
N
-O
FF
switch (A) to position "I"
(O
N
).
2.
Move the choke lever (C) to run position
(C2) = closed.
3.
Pull start rope (D) until the engine is
running.
16.2
Switching off the machine
1.
Release the throttle.
2.
Set O
N
-O
FF
switch (A) to position "0" (O
FF
).
16.3
Turning the Handle
To give you the best and most ergonomic way to trim your hedge,
the handle can be rotated 90 degrees to the right or left - see
illustration on the left.
Notice:
Do not press on the throttle when turning the handle!
Procedure:
Press the throttle lock (1) on the top of the rear handle. Then push
the locking handle (2) downwards while simultaneously turning the
handle to the left or right – see illustrations on the left.
16.4
Recommendations for Cutting
Only accelerate as much as necessary.
Hold the hedge trimmer at an angle of 5-10 degrees to the
hedge (see illustration on the left).
→
This makes cutting easier and the result is better.
