Zipper Mowers 9120039232256, User Manual

Page: 24 / 91

MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 24
ZI-STE1200IV
12.3 Engine oil change
A T T E N T I O N
Switch off the machine before starting the engine oil change!
Drain the used oil quickly and completely while the engine is still warm.
For the purposes of environmental protection fill the oil in tight containers and dispose the oil in a
recycling center. Do not dispose it with household waste

Unscrew the oil filler cap (3); tilt the machine and let the used oil run
into a suitable container.

Add new engine oil (15W40, 260ml) (2) and close the oil cap.

Clean it with a rag.

Put the machine on an even area and start the engine. If there is
sufficient oil level the oil-warning sensor (1) will be not activated.
12.4 Air cleaner

Loosen the screws and remove the air
cleaner cover (1)

Remove the air cleaner (2)

Clean the air filter with soapy water,
then rinse with clear water and let it
dry thoroughly before reassembling.

Reassemble the air cleaner in reverse
order
12.5 Spark plug

Remove the spark plug cap (1).

Loosen the spark plug (2) using a
spark plug socket (3).

Remove carbon deposits with a
copper wire brush.

Check electrode gap (0,6 -0,7mm)

Reassemble the spark plug in reverse
order