OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
29
ZI-WP700TN
15.1.1
Unlocking the machine
NOTICE:
the locking plate (1) must be released be-
fore start-up of the machine (see Fig. H)!
15.1.2
Setting the log ruler
1.
Loosen the star screw (1) so that the log ruler
(2) can be pulled out (see Fig. I, Pic. 1).
2.
Use the scale to set the desired length of the
workpiece (see Fig. I, Pic. 2).
3.
Turn the log ruler (2) clockwise to the top (see
Fig. I, Pic. 3).
4.
For fixation, retighten the star screw (1) (see
Fig. I, Pic. 4).
15.2
Operating
15.2.1
Start/Stop
Starting the machine: press the green
˝I˝
button on the ON-OFF switch.
Stopping the machine: press the red
˝O˝
button on the ON-OFF switch.
15.2.2
Workflow
1.
Switch on the machine.
2.
Open the top guard.
3.
Position the cut material into the log carriage on the completely extended rocker unit.
4.
Close the top guard again.