ASSEMBLY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
27
ZI-WP700TN
14
ASSEMBLY
14.1
Checking scope of delivery
Check the machine immediately after delivery for transport damage and missing parts.
14.2
The workplace
Choose a suitable place for the machine. Pay attention to the safety requirements and the dimen-
sions of the machine. The selected location must ensure a suitable connection to the electrical sup-
ply. Make sure that the machine is placed on a solid and level surface and that the ground can sup-
port the load of the machine. The machine must be levelled at all support points. It is also neces-
sary to guarantee a distance of at least 0.8 m around the machine. The necessary distance for the
feeding of long workpieces must be provided.
Anchoring on level ground
Use four bolts to secure your machine to the
ground. Due to the different ground conditions,
these are not included in the delivery content. Se-
lect the correct bolt type for your soil conditions
(see Figure).
14.3
Assembly
The machine is delivered pre-assembled. The wheels supplied must be assembled as shown below.
Before commissioning, check all screw connections for tightness and tighten them if necessary.
Slide one washer (1), wheel (2) and another washer
(3) onto the wheel axle and secure with a cotter pin
(4).
14.4
Electrical connection
W A R N I N G
Dangerous electrical voltage!
The machine may only be connected to the mains sup-
ply and the associated checks carried out by a qualified electrician or under the instruc-
tion and supervision of a qualified electrician!