TROUBLESHOOTING
38
ZI-STE3000IV
15
TROUBLESHOOTING
If you are unable to carry out the necessary repairs properly and/or do not have the required training, always
consult a specialist to solve the problem.
Trouble
Possible cause
Solution
Engine does not start
•
Incorrect starting sequence
•
Observe the correct starting
sequence
•
Dirty air filter
•
Clean/replace air filter
•
No fuel supply
•
Refuel
•
Fault in the fuel line
•
Check the fuel line for kinks
or damages
•
Engine flooded
•
Screw off, clean and dry the
spark plug. Then pull the
cranking rope several times
and reinstall the spark plug
•
Spark plug connector not
placed on
•
Place on the spark plug
connector
•
No ignition spark
•
Clean/replace spark plug
•
Check ignition cable
•
Fuel tap closed
•
Open fuel tap
•
Insufficient engine oil
•
Check engine oil level
Engine starts and is
stalled immediately
•
Incorrect idle adjustment
•
Contact the service team
Machine works with inter-
ruptions
•
Carburettor
•
Contact the service team
•
Spark plug fouled
•
Clean/replace spark plug
•
Check spark plug connector
Low oil light glows
•
Check engine oil level
•
Fill engine oil
•
To less or no engine oil
•
Fill engine oil
Overload indicator light
glows
•
High temperature protection
activated
•
Cool down the engine
•
Overload protection activated
•
Reduce existing load
•
Short circuit protection acti-
vated
•
Check loads
