ZIPPER MASCHINEN ZI-STE2800IV, User Manual

Page: 25 / 56

TROUBLE SHOOTING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  25
ZI-STE2800IV
14 TROUBLE SHOOTING
Trouble Possible cause Solution
Engine does not start  Incorrect starting sequence  Observe the correct starting
sequence
 Dirty air cleaner  Clean/replace air cleaner
 No fuel supply  Refuel
 Fault in the fuel line  Check the fuel line for kinks
or damages
 Engine flooded.  Screw off, clean and dry the
spark plug. Then pull the
cranking rope several times
and reinstall the spark plug
 Spark plug connector not placed on.  Place on the spark plug
connector
 No ignition spark  Clean/replace spark plug
 Check ignition cable
 Fuel cock closed  Open fuel cock
 Engine oil to few  Check engine oil
Engine starts and is stalled
immediately
 Incorrect idle adjustment  Contact customer service
Machine works with
interruptions
 Carburetor incorrectly adjusted  Contact customer service
 Spark plug fouled  Clean/replace spark plug
 Check spark plug connector
Low oil light glows  Check oil level  Fill engine oil
Low oil light glows  To less or no oil  Fill engine oil
Overload indicator light glows  Low voltage protection activated  Engine speed to low
Overload indicator light glows  High temperature protection
activated
 Cool down the engine
Overload indicator light glows  Overload protection activated  To big loads
Overload indicator light glows  Short circuit protection activated  Check loads
N O T I C E
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the
problem.