ZIPPER MASCHINEN ZI-RMTR40V-AKKU, User Manual

Page: 34 / 47

TROUBLE SHOOTING
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  34
ZI-RMTR40V-AKKU
15 TROUBLE SHOOTING
BEFORE YOU START WORKING FOR THE ELIMINATION OF DEFECTS, DISCONNECT THE
MACHINE FROM THE POWER SUPPLY.
Trouble Possible cause Solution
Motor does not start  Safety switch is not plugged in  Plug in safety switch
 Battery is not plugged in  plug in battery
 Battery is not charged  Recharge battery
 Safety switch is damaged  Check safety switch
 Power switch is damaged  Check safety switch
Unusual, loud noises and
excessive vibrations
 Loosen cutting tool  Tighten cutting tool
 Debris on the cutting tool  Remove derbies
 Cutting tool damaged  Change cutting tool
Poor pickup of the grass  Wrong cutting height  Set to correct cutting height
 Full grass box  Empty grass box
Poor cutting result  Blunt cutting tool  Sharpen or change cutting tool
 To high grass  Set to correct cutting height
Battery cannot charged
anymore
 Contact failure  Check contact pins
 Battery damaged  Change battery
N O T I C E
Should you in necessary repairs not able to properly to perform or you have
not the prescribed training for it always attract a workshop to fix the
problem.