MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
28
ZI-PTKS85
14
MAINTENANCE
A T T E N T I O N
Perform all maintenance machine settings with the machine being
disconnected from the power supply!
Serious injury due to unintentional or automatic activation of the
machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
N O T I C E
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location.
14.1
Changing saw blade
N O T I C E
Wear safety gloves when you work with saw blades!
Set the blade tilt to 0°
Remove inlet
Set the height adjustment to its highest position.
Rotate the arbor shaft until the Allen wrench slips
into the shaft locking hole and lock the shaft
Remove the blade screw and washer
Change saw blade and replace screw and washer
Replace the inlet
