OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
26
ZI-PTKS85
13
OPERATION
Device to be operated in a perfect state only. Inspect the device visually every time it is to be used.
Check in particular the safety equipment, electrical controls, electric cables and screwed connection for
damage and if tightened properly. Replace any damaged parts before operating the device.
13.1
Operation instructions
W A R N I N G
Perform all machine settings with the machine being
disconnected from the power supply!
N O T I C E
Operating only with started dust collector!
Never start the machine when the workpiece is pressed to the saw
blade!
Before starting the machine check if the saw blade is tightened
Always adapt cutting speed to the respective working
Use the push stick to avoid the risk of contact with the saw blade
Slide the workpiece evenly, without relapses and without retake it
until the end of cutting.
13.2
Operation
1
ON-switch
2
OFF-switch
3
Speed controller
4
Blade adjustment lock
5
Blade height adjustment lock
6
Blade height adjustment
7
Tilt scale
Attach the dust collector plug into the hole
on the backside of the machine
