MAINTENANCE
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
23
ZI-GRM1100
16
MAINTENANCE
A T T E N T I O N
Perform all maintenance machine settings with the machine being
disconnected from the power supply!
Serious injury due to unintentional or automatic activation of the
machine!
The machine does not require extensive maintenance. If malfunctions and defects occur, let it be
serviced by trained persons only.
N O T I C E
Clean your machine regularly after every usage – it prolongs the machines lifespan and is a pre-
requisite for a safe working environment.
Repair jobs shall be performed by respectively trained professionals only!
Check regularly the condition of the security stickers. Replace them if required.
Check regularly the condition of the machine.
Store the machine in a closed, dry location.
16.1
Maintenance plan
After each workshift:
Clean the machine as follows:
Run the plucker for two minutes with the irrigation ring on. This will flush most of the feathers on the
plate and in the feather pan out of the unit through the feather chute. Disassemble tub from feather
pan. Remove feathers and debris.
Never grip into the running drum or keep cleaning tools in the running drum!
16.2
Cleaning
N O T I C E
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild solution
16.3
Disposal
Do not dispose the machine in residual waste. Contact your local authorities for information
regarding the available disposal options. When you buy at your local dealer for a
replacement unit, the latter is obliged to exchange your old.