CLEANING, MAINTENANCE, STORAGE, DISPOSAL
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
34
ZI-ASA550ESA
14
CLEANING, MAINTENANCE, STORAGE, DISPOSAL
W A R N I N G
Danger due to electric voltage! Don’t clean or do maintenance on the machine
while it is still connected to the power supply: Damages to machine and injuries
might occur due to unintended switching on of the machine!
Therefore: Switch the machine off and disconnect it from the power supply
before any maintenance works or cleaning is carried out.
N O T I C E
Only a regularly serviced and well maintained machine can be a satisfactory tool.
Maintenance and service deficiencies can lead to unpredictable accidents and
injuries.
Repairs requiring special expertise should be carried out only by authorized
service centres.
Improper repairs can damage the machine or affect your safety.
14.1
Cleaning
N O T I C E
The usage of certain solutions containing ingredients damaging metal
surfaces as well as the use of scrubbing agents will damage the machine
surface!
Clean the machine surface with a wet cloth soaked in a mild solution.
Clean your machine regularly after every usage. Remove chips and dust from the machine
regularly after operation:
Clean the base frame and the device unit with a damp cloth.
Clean the electric motor and the ON-OFF-Switch only with a dry cloth.
Attention:
Do not splash the motor and the ON-OFF-Switch directly with a water jet.
Always wear a dust mask when emptying the sawdust collector bag and cleaning the
machine (particle filter - filter class 2).
Prepare the surfaces and lubricate the bare machine parts with an acid-free lubricating oil.
Regular cleaning is a prerequisite for the safe operation of the machine and its long service
life.
14.2
Maintenance
The machine is low-maintenance and only a few parts have to be serviced. Nevertheless,
malfunctions or defects which could impair the safety of the user must be rectified
immediately!
W A R N I N G
Danger due to electrical voltage! Handling the machine with the power supply
up may result in serious injury or death. Always disconnect the machine from the
power supply before servicing or maintenance work and secure it against
unintentional restart!
