SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
14
ZI-MUP350 / ZI-MUP750
12
SAFETY
12.1
Intended Use
The machine must only be used for its intended purpose! Any other use is deemed to be a case of
misuse.
To use the machine properly you must also observe and follow all safety regulations, the assembly
instructions, operating and maintenance instructions lay down in this manual.
All people who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The machine is used for:
Drainage and for pumping into and out of containers in the house, garden, farm and agriculture
The machine is suitable for:
Clear water, rainwater, chlorine-containing water (e.g. swimming pools), waste water.
This machine is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the machine by a person responsible for their safety.
Never allow children or people unfamiliar with these instructions to use the machine. Supervise
children. This will ensure that children do not play with the machine.
Any manipulation of the machine or its parts is a misuse, in this case
ZIPPER-MASCHINEN
and its sales partners cannot be made liable for ANY direct or indirect damage.
Prohibited use:
The machine must not be used continuously.
They are not suitable for conveying:
Drinking water; salt water; foodstuffs; aggressive media, chemicals; corrosive, flammable, explosive
or fuming fluids; Fluids that are hotter than 35 °C; Water containing sand and abrasive fluids; feces.
•
The operation of the machine outside the stated technical limits described in this manual is
forbidden.
•
Any manipulation of the machine and parts is forbidden.
•
The use of the machine not being suitable for the use of the machine and not being certified is
forbidden.
•
The use of the machine for any purposes other than described in this user-manual is forbidden.
The unattended operation on the machine during the working process is forbidden!
•
It is not allowed to leave the immediate work area during the work is being performed!
