ENGLISH
IT
ALIANO
ESP
ANOL
10
The mixer-amplifiers are features a built-in media player which includes Mp3/FM/DAB/
Bluetooth. Pressing the Mode button to switch the media player among Mp3/FM/Bluetooth
according to the LED display. The IR remote control enable to operate the media player
remotely around 10 to 30 meters, this media player output volume control also could be
controlled by the “TEL” volume knob.
BLUETOOTH
USB/SD PLAYBACK
FM TUNER
DAB TUNER
The Bluetooth function allows connection of a smart phone or tablet to the media player
section for playback of stored files or streamed digital audio. In order to enable this function,
it will be necessary to pair the sending device to the receiver as follows.
1. Open the Bluetooth settings menu on the smart phone or tablet (or other sending device)
2. Scan for Bluetooth devices and look for it in the list of available devices (ensure that the
amplifier is powered on and within 10 meters reception range)
3. Select the blue tooth and the sending device should confirm that it is connected as an
audio device
4. Play audio from the sending device, ensuring that volume controls are not turned down/
muted
5. Turn up the MEDIA volume control on the amplifier to the required level. If the Bluetooth
signal is lost, it may be necessary to re-select the Bluetooth on the sending device. The
Previous, Next and Play/pause buttons will operate in Bluetooth as remote playback
controls. Holding the Previous track or Next track buttons will adjust the output volume
of the player.
Push a USB pen drive into the USB port and/or an SD card into the SD card input. Press the
USB/SD button to ensure that the player is set to play from the required memory device.
Press the PLAY/PAUSE button to play the current track and press again to pause as needed.
Press the MODE button to switch to FM tuner function.
To start automatic tuning press and hold the RPT button until it starts, once finished press
the PREV- and PREV+ buttons to select a stored channel.
For manual tuning, press the FOLDER or RPT key to tune the desired frequency, then press
PLAY to memorize it, the memory number is increased and is progressive.
Press the MODE button to switch to DAB tuner function.
To start automatic tuning press and hold the RPT button until it starts, once finished press
the PREV- and PREV+ buttons to select a stored channel.
Press the PLAY or FOLDER button to switch between the current station name and frequency.
Summary of Contents for ZZONE350PA
