R I V E T T / R O C K E T T
14
Bulkheads 1 and 2 glued tightly to bottom. Do
not glue center of 2, as it will be cut out.
Bottom glued to sides.
Cutting out center of bulkhead 2.
Slide the gluing block back to bulkhead 2,
and glue it to the bottom the same way. Do
not glue the center area of bulkhead 2, as it
will be removed later.
DO NOT glue bulkhead 3 to the bottom
yet!
Glue the nose portion of the bottom to the
sides, aligning the front tip of the sides to
the bottom.
Use thin CA and accelerator. Double glue.
Double glue bulkheads 1 and 2 to the
bottom and sides.
Use your slitting saw or razor saw to cut
the center out of bulkhead 2.
Leave the top bridge in place for now, as it
keeps the sponsons from twisting until we
can put the deck on.
Summary of Contents for RIVETT
