E A S Y V E E
4
Additional items needed to complete:
Gasoline engine with 5 inch mounts (Zipp 3409 Zenoah mounts)
.250 Collet for engine (Zenoah type engines) (Zipp 3446 )
.250 24 inch cable w/welded stub shaft (Zenoah type engines) (Zipp 3444 )
.250-.250 brass ferrule (sport “trimmer” type engine) (Zipp 3433 )
24 inch section of square drive cable (“trimmer” type engine- get from trimmer)
¼ inch stub shaft (“trimmer” type engine) (Zipp 3447 )
¼ inch thrust bearing (“trimmer” type engine) (Aeromarine # 1502 )
Tuned pipe w/90 or 100 degree header or canister muffler (Zipp 2000/2010 or 2011)
2 channel surface radio with 1 standard and 1 heavy duty servo (100 in/oz minimum)
Throttle pushrod (Zipp 3462)
Rudder pushrod (at least “4-40” size) (Zipp 3463)
2 pushrod seals (Zipp # 3404 )
14-24 ounce fuel tank (or 500-750mL IV bag) and tubing (gasoline compatible)
.250 stinger type drive (Zipp 3401)
.250 drive dog (Zipp # 3405 )
70 mm prop (starting point) (Zipp 4000)
Prop nuts (Zipp # 3450 )
Cable grease (Aeromarine # 7145 )
Large rudder (water pickup type- Zipp #3402 or 3413)
3 feet large silicone tubing (water line, Zipp 3461)
Trim tabs and turn fin (Zipp 3417 and 3410)
36 inch length of 5/16 brass tubing (Zipp 3452)
Floatation (pool noodles, foam, etc.)