E A S Y V E E
39
Front of strake. Keep parallel to keel.
Rear of strakes installed.
Strakes done…
When you are sure that everything is ready, get out
your medium CA
Put a small bead of CA on the bottom of one strake.
Only use a tiny bead, from end to end. We don’t
want any to squeeze out from between the strake
and the bottom.
Start at the rear, align your marks, and touch the
rear of the strake to the bott
om. Don’t let the
forward part touch yet.
Press down, and move forward, making sure that
the strake is following your line exactly.
It must be parallel with the keel.
The glue will stick almost instantly to epoxy.
When done, repeat on the other side.
When both are done, seal them with a coat of resin
with a brush, and use a clean rag to wipe excess
resin off, after it has soaked in for a few minutes.