E A S Y V E E
32
Ready to run.
Turn fin detail.
Trim Tabs
Mount your trim tabs to the transom so that they are
flush or just a hair up from the bottom.
Also mount them so that they are 1-1/2 inches from
the center of the hull. This ins
ures that they don’t
interfere with the water going to the prop.
All pictures of the trim tabs mounted show them in
the wrong position. These were taken before the
prototype were run…
Turn fin (if used)
The turn fin should be mounted on the extreme right
side of the transom, above the trim tabs. Make sure
the fin is 90 degrees to the bottom. It will be canted
outward with the hull level.
The Easy Vee turns much tighter with a turn fin,
although you can run without one.
If you are racing, we recommend a fin on each side,
for right and left turns.