E A S Y V E E
9
Cutout rail on the correct side.
Keel supports, with rubber bands holding the keel.
Bulkheads and keel in place.
Check the fit of the engine rails into bulkheads 3, 4
and 5.
Be sure that the cutout rail is on the right side of the
boat. This will be on the left (from the rear), when
looking at the boat upside down. If ok, glue them in.
Wrap 2 or 3 medium sized rubber bands around the
keel supports, under the keel.
These keep the keel from bending or twisting as we
attach the stringers.