Zip ZIP116, Instruction Manual

Page: 9 / 413

© 2023 System Q Ltd
3
Index
ZipNVR.com
Non-PoE NVRs PoE NVRs
Hard Drive*
6TB
Max
(1x 6TB)
12TB
Max
(2x 6TB)
24TB
Max
(4x 6TB)
12TB
Max
(2x 6TB)
6TB
Max
(1x 6TB)
24TB
Max
(4x 6TB)
48TB
Max
(8x 6TB)
eSATA No
Yes -
40TB
Max
Yes -
40TB
Max
No
Yes -
40TB
Max
Yes -
40TB
Max
Yes -
40TB
Max
Communicati
on
RS232 / RS485 RS232 / RS485
Power
12V
DC / 2A
12V
DC / 5A
12V
DC / 5A
48V
DC /
1.2A
48V
DC / 2A
52V
DC /
2.5A
(Built-in)
52V
DC /
2.5A
12V
DC / 5A
(Built-in)
Dimensions
300 x
217 x
53mm
378 x
330 x
50mm
378 x
325.8 x
70mm
378 x
325.8 x
50mm
378 x
325.8 x
50mm
378 x
325.8 x
70mm
440 x
450 x
98mm
*Our NVRs take the latest 8 and 10TB sizes but we’ve based our table on a
maximum capacity drive size of 6TB as they currently represent the best value for
money.
1.3 Installation Guidlines
1. Never operate the equipment using an unspecified power supply.
2. Do not install the equipment in a dusty or damp area. Avoid a humid environment.
3. Keep the surface of the equipment clean and dry. Use soft damp cloth to clean the
outer case of recorder (do not use liquid aerosol cleaners.)
4. If the system clock fails to work, power down the recorder, remove the top of the
case and replace the standard 3V lithium battery on the main board.
5. Always install the recorder in a place with good ventilation ensuring that the
ventilation slots are not covered and that there is a good flow of air around the
recorder. Due to the heat produced especially by the Hard Drive/s, reducing
ventilation can reduce life of the recorder components and the Hard Drive/s.
6. The power adaptor on the recorder must only be used to power one recorder
because connecting additional equipment can cause the recorder to reboot due
to insufficient power.