Zip ZIP116, Instruction Manual

Page: 350 / 413

20/04/2023
344
Zip DVR Manual V2
ZipNVR.com
15.1.3.1 System Menu - General - Output Configuration - Live Out
Selecting LIVE-OUT from the Video Output drop down list in the General Output
sub-menu allows you to configure the display of the recorders live view for the HDMI
and VGA outputs.
As this is the main output of the recorder this will also display the menu system and
the mouse cursor.
You can configure the following the settings for the recorder's live view display.
Setting The Live View Auto Switch Layout
The camera layout which is displayed when you select Auto Switch in the Live View
menu can be set in the Seq Mode drop down list. You can select a single channel
display or one of the various multi-channel displays from the drop down list.
Setting The Auto Switch Timing
You can choose the amount of time the recorder displays the Auto Switch layout
before moving on to the next camera or group of cameras in the
SEQ Dwell Time
field. This is a free text field where you can specify in seconds how long the recorder
should display each layout.
Choosing The Recorder's Output Resolution
You can choose the resolution used for the HDMI and VGA outputs from the Output
Resolution drop down list.
The recorder supports up to a 4K output which can be displayed over HDMI or you
can display up to 1080P over VGA and HDMI. Alternatively you can click the
Automatic Recognition check box and the recorder will set itself to the maximum
resolution supported by your monitor.
343
31