Zip ZIP116, Instruction Manual

Page: 235 / 413

© 2023 System Q Ltd
229
Index
ZipNVR.com
10.3 Record - Capture
In the Capture sub-menu you can configure each camera to take snapshots at set
intervals. This is great for time-lapsing images or low level monitoring where a video
isn't necessarily required. Once you have configured your capture settings can create
a
Capture Schedule to control when snapshots are captured.
The settings available will differ depending on recorder, camera type and camera
model.
Camera
Lists all channels on the recorder.
Enabling And Disabling Snapshot Capturing
To enable or disable snapshot capturing for each channel individually by ticking or
unticking the
Auto Capture check box.
Please note that this only tells the recorder that these channels are OK to capture
snapshots. You still need to create a
Capture Schedule to tell the recorder when to
capture snapshots. Without a Capture Schedule the recorder won't capture any
snapshots.
Choosing Which Stream To Take Snapshots From
You can select which stream the snapshots are taken from for each channel using the
Stream Type drop down list, Mainstream or Substream .
232
232